Kalamazoo Thrift Store Tour

Every time we go to Kalamazoo, we get sucked in by the breweries and bypass the thrift stores. Not this time. I looked up all the thrift stores in the area on Google Maps and clicked “avoid highways,” becasue that’s how we like to travel.

We started out at a Salvation Army Family Store where I scooped up a twin size vintage sheet, among a few other treasures. It’s fitted, so I’ll have to cut the elastic out of it before I can use the fabric. I knew it was old when I tugged on the elastic, and it crunched. Busted elastic may make other buyers shy away, but since I am just harvesting the fabric, I scored some serious yardage.

_DSC3116
No maker label, but I suspect it’s from the 1970s.

 

I also found the most amazing vintage beach towel I have ever seen. I think I can make about six messenger bags out of the terry cloth. The sail boats absolutely kill me.

_DSC3108
This towel has all the colors.
_DSC3106
Sail on!

 

I found another Salvation Army just down the road in Portage, MI. Judging from the photos online, this joint was massive. And it was. After perusing the neckties, I went through the “boudoir” section and headed for the linens. They had a ton of fabric that was sorted nicely, but none of it appealed to me. I’m very particular about the type of fabric I buy these days. Not by choice. I just don’t have any more space to store mediocre polyester. Make no mistake. I can always find a spot to squirrel away some premium fabrics.

The three racks behind the fabric had some awesome sheets and pillowcases.  I turned up a Monticello by Cannon floral flat sheet and a few pillow cases made by Penn-Prest, Sears, and Springmaid.

_DSC3114
Monticello by Cannon

 

_DSC3113
I’m digging the orange butterfly on that yellow pillowcase.

It was right about this time that I saw a sheet pattern that I recognized. A while back, I bought a Cannon Royal Family Featherlite bed spread from the Kalamazoo Antiques Market for $8 that I planned to use for fabric. When I got home and discovered that while the sizing was for a full size mattress, it fit our queen size bed well enough and I decided not to cut it up. Today, a matching queen size flat sheet was hanging on the rack at the Sal. Coincidence or fate? I can’t wait to bust out this 1970s sheet/bedspread combo when the weather warms up.

_DSC3121

The half-off color was yellow. I looked down at my findings and saw a few yellow tags, including the sheet that partially completes our springtime bed set. Yes. That’s the sugar.

We decided to test out a few Goodwill Stores, which as you might already know, can be hit or miss on vintage merchandise. Sometimes, I suspect there are people within the organization who don’t see any value in old clothing, fabric, or linens and cast it aside. But in reality, I have no idea what their sorting standards are like. We did find a few vintage neckties for $1.19 each at one Goodwill, while another location was a total bust.

 

_DSC3101
The new vintage necktie lineup from various Kalamazoo area thrift stores.

 

My intuition was telling me that our luck was running out. There’s only so much gold you can dig up in one day. We decided to hit the NuWay Thrift Store on Cork Street as our last stop. The interior of the store is really dark, and the prices are fairly high. As a result, they have tons of stuff that appears as if it has been hanging around for a while. I am more than willing to dig through piles of clothing and fabric if I think I can come up with something for a good price, but this isn’t my first thrift store rodeo. I can sniff out a low-turnover hoard of mediocre goods in an instant. It wasn’t all bad. I managed to unearth two pieces of pretty cool polyester knit among the fabric. It was finally time to split and drink a celebratory beer at Bell’s Brewery.

 

_DSC3102
It looks like wool, but it’s not. Polyester forever!
_DSC3104
If you look at it too long, the pattern will start to move.

 

Advertisements

The 18” quilted pillow semi-failure

I rarely make something for the first time and end up with perfect results, and this 18-inch quilted pillow is certainly no exception. I have a ton of vintage fabric and decided to make a large quilted pillow for my couch because you can never have too many throw pillows. I am a largely self-taught sewist, so if any of you pros out there have some suggestions, leave me a comment!

 

To make the pattern, I cut a flap off the top of a box of beer and found it was four inches wide. I cut it into a four-inch square and decided that if I made the pillow five squares tall and five square wide, I would end up with dimensions of 20 inches by 20 inches before any seam allowance.

_dsc1294

I randomly picked 25 different patterns of polyester knit fabric and tried to cut the 25 squares with expert precision.

 

_DSC1298.JPG

 

After arranging the squares just how I wanted them, I sewed them together in strips of five with a ¼ inch seam allowance.

_dsc1345

 

To join the strips together, I pushed the seams in opposite directions and sewed the strips together.

_dsc1317

I decided to use some fusible interfacing to back the both sides of the pillow. This is where it all went wrong. Instead of putting the interfacing on the back of the quilted piece after I sewed it all together, I should have bonded the interfacing to each individual square. Since I was working with polyester knit, it stretched in different directions and all my squares looked crooked. So much for my super-duper straight squares.

I decided to try and straighten the mess by top-stitching on either side of the seam and pulling the squares back into position as I went. It helped a bit, but black thread was probably not the best choice. Next time, I’ll go with something that blends a bit better. Still, it’s not a complete throw-away.

 

_dsc1341
After the top stitch. Meh.

For the backing, I chose some vintage bark cloth and backed it with the interfacing as well. I dug up an 18-inch zipper to install along the bottom. I basically stink at installing zippers. I’m more of a snap and button person. I cannot figure out the zipper foot that came with my machine to save my life, so I winged it with the regular foot.  However, for my skill level, I think it turned out OK.

_dsc1330

After the zipper was in place, I sewed the backing to the front and trimmed the inside corners so that when the pillow is right side out, they will be pointy instead of the fabric bunching up in the inside of the corner. Here is the end result:

 

 

Did it turn out to be 18 inches? No. It’s about 17 ½, but when I stuffed an 18-inch pillow insert into the cover, it plumped out nicely. So the first run was not terrible, and I would definitely make more of these in different sizes.

Five new bags for fall

I decided to take a short break from gathering more supplies and turn out some new stuff. It was a short break, because I feel like I need to get as much second hand shopping in as possible before winter sets in. Here’s what I came up with last week:

I combined all the different bark cloth and vintage linen I had and came up with this beauty. The San Diego Transit patch on the front flap sort of matches the vintage Wembley necktie I used for the strap and interior pocket, but that’s where the matching stops. My friend said the pattern on the front looked like Brussels sprouts. I’ll take that as a compliment.

I made a bag a couple weeks ago with a flower pattern made from vintage buttons on the front flap. It sold almost immediately, so using buttons as embellishments is my new jam. Pink and green floral patterns rule this bag. Recognize that fern pattern on the sheet I used for the liner? I think everyone had a set of these sheets at some point. My mom sure did.

I went with a secondary colors scheme on this one. First, I found that tan, green and purple fabric at the Salvation Army. It was also half price, so that was a bonus. The very next day, I found the vintage chenille band letter from 1939 in an antiques mall. I knew immediately that I had to combine these two elements with some matching fabric. Here is the end result.

I recently made a red, white, and blue bag that featured a vintage towel for the front flap and it was big hit. So I decided to follow it up with another bag with a patriotic color scheme. I had this sweet clip-on tie that I decided to use the bottom of it for the front pocket. It had a small flaw on the lower left, but hey, the awesome pattern makes up for all that. The top of the pocket is red corduroy and has a black pearl snap closure.

But the cherry on top of this bag is the new old stock bowling patch from the bicentennial. I believe all the fabric is from around 1976. There seems to be abundance of red, white, and blue polyester out there on the second hand market. I suspect there are tons more hiding in closets waiting to be made into something. I’ll be looking for it.

I make a lot of bags with really loud colors. It’s kind of a thing. On this one, I tried to tone it down a bit. Just a bit though.  The front is made from a vintage towel. I’m trying to find more vintage towels and do the same kind of thing. It really puzzles me why they don’t make towels like this anymore. I guess they went away just like colored bathroom fixtures. Now we live in a land where all the toilets are white.

The tie I used for the strap is really interesting. I bought a ton of vintage ties from Northern Scout Vintage on Etsy and this is one of them. There is a thunderstorm complete with lightning bolts over a cityscape printed on the tie. Bonus points if you can tell me which city this might be because I have no idea.

For the rest of the fabric, I combined neutral tones such as the vintage 1950s bark cloth on the back and the USMC camo fabric for the liner with yellow fabric for the side of the gusset and under the front flap.

Thanks for swinging by my blog and checking it out! If you have any ideas about color schemes or just sewing in general, leave me a comment. I would love to hear from you.